9632自己带MASTER CLOCK是高贵音质关键.
RME Hammerfall HDSP 9632 24Bit 192kHz Audio PCI Card (Mac and PC)
The RME Hammerfall DSP 9632 arrives as the world's most versatile PCI Audio Interface. This card makes the dream of an All-In-One solution for every possible application come true. As usual, RME has not made any compromises: Latest AD and DA converters with more than 110 dB signal to noise ratio, all inputs and outputs simultaneously operational, easy to install optional analog expansion boards, the famous TotalMix, a newly developed, high-quality clock generator with total jitter suppression of external clock signals – all this combines into a 'soundcard' that the world has been waiting for so long.
An easy to handle ribbon cable connects the newly developed optional AI4S-192 and AO4S-192. These analog expansion boards having one bracket with 4 stereo TRS jacks offer the same performance as the on-board stereo analog I/O of the HDSP 9632: up to 192 Khz, balanced and 3 different reference levels. With this a maximum of 6 inputs and/or outputs can be achieved.
HDSP 9632 also supports the existing Expansion Boards (EXB). An internal ADAT input and an internal ADAT output allow for up to 14 analog inputs, 14 analog outputs, or the usage of a TDIF interface, directly inside the computer.
Features
*Balanced stereo analog in- and output up to, 192 kHz/24 bit, > 110 dB SNR
Optional analog expansion boards with 4 balanced in- or outputs
All analog I/Os capable of 192 kHz, constant number of available channels
1 ADAT digital I/O, supporting 96 kHz S/MUX operation
1 SPDIF digital I/O, 96 kHz-capable
1 Breakout cable for coaxial SPDIF
Up to 16 I/Os can be used simultaneously!
1 Stereo headphone output, parallel to the analog out, with independent level setting
1 MIDI I/O with 16 channels of hi-speed MIDI via breakout cable
TotalMix: 512-channel mixer with 40 bit internal resolution
* The HDSP 9632 ships in a basic version including two RCA/phono breakout cables (headphone: TRS jack). Therefore all analog I/Os and the SPDIF I/O are unbalanced. XLR breakout cable are available as option (headphone: Neutrik TRS locking jack), turning analog and AES/EBU into balanced mode.
Included Software
HDSP Meter Bridge: Scalable level meter with Peak- and RMS calculation in hardware
DIGICheck 3.0 for Windows: Spectral Analyser, professional level meter for 2, 8, or 16 channels, Vector Audio Scope, various other audio analysis tools.
Drivers: Windows 2000/XP (full multi-client operation of MME, GSIF and ASIO 2.0), Mac OS X
HDSP 9632 debuts SteadyClock™, a newly developed clock technology, combining professional features like maximum jitter suppression at full varipitch capabilities and software controlled sample rates.
Settings Dialog
Just click on the hammer symbol in the systray of the taskbar and the settings dialog of the HDSP 9632 comes up. The clearly-structured, easy to understand window plus the unique informative status windows for input signal, clock mode and sample rate and time code make your work with Hammerfall DSP to a real pleasure.
When working with several digital sources it is not only necessary to know if these are properly locked, but also if they are totally synchronized. RME's exclusive SyncCheck checks all input signals and displays their actual state, and thanks to our new Intelligent Clock Control concept you have all clocks and states under control - with ease.
The optional 9632 Word Clock Module provides a galvanically isolated word clock input and two word clock outputs via BNC jacks. Compared to the well-known DIGI96/8 series, the HDSP 9632 not only offers a further improved analog interface, but also all the features of the award-winning Hammerfall DSP series: All inputs and outputs simultaneously available, MIDI I/O and TotalMix, the DSP-based realtime mixer/router. Hardware updates through software and driver updates are risk-free thanks to the Secure BIOS Technology.
In short: The HDSP 9632 is the ultimate audio interface for PC or Mac, digital or analog.
Unique Technologies in Hammerfall DSP
AutoSync: Intelligent clock control according to operational mode and present/desired sample rate.
Bitclock PLL
he most reliable receiver circuit for ADAT optical signal.
Dynamic Bus Utilization:Scalable computer load according to the current usage.
Enhanced ZLM®:Monitoring of the input signal, independent from clock mode and sample rate.
Intelligent Clock Control:Measurement and display of all incoming and used clocks.
Latency Fast Change:Change latency on-the-fly under ASIO, without manual reset or re-boot.
SyncAlign®:Surveillance and sample accurate synchronization of all channels.
SyncCheck®:Comparison and display of all input clock status.
Zero Latency Monitoring (ZLM®):Automatic monitoring of the input signal with zero latency.
TotalMix - Mixes all inputs and all outputs on all outputs. Several independent submixes possible.
All I/O boxes of the Hammerfall DSP System contain a hardware mixer in TotalMix technology. Any input and output can be routed and mixed to any output. Limited only by the available outputs of the I/O-box, up to 14 independent submixes are available. Internally, the mixer works with 40 bit wordlength. For level alterations there are 65536 steps that allow for a virtually continuous change between 6 dB gain and maximum attenuation. In unity gain setting, the mixer is even bit-transparent and can pass the input signal unaltered. The Digiface processes 1456 channels in real-time, which corresponds to the computing power of a Motorola DSP at 100 MHz. TotalMix not only leads to perfect and complete ASIO direct monitoring, but is also useful without ASIO. Thanks to a proprietary mixer surface, submix and Zero Latency Monitoring can be used with all audio applications. An external mixer thus becomes unnecessary in many cases.
DIGICheck DSP - Professional status and level display at lowest CPU load.
Hammerfall DSP implements RME's DIGICheck in hardware. This means: level metering of all inputs, all playback channels and all outputs at the same time with a minimum of CPU load, because the display data is already calculated in the hardware. The hardware catches both peak and RMS values. With these features, you have a unique multichannel level meter in broadcast quality worth several thousands of Dollars virtually at no cost. In addition, the level meter is integrated into the mixer surface, thus making setting and control easier.
About RME
RME is a young German team of developers with a robust vision of creating innovative, user friendly, and high-quality digital audio solutions for less money. Founded in 1996, RME quickly earned their stripes as a premiere industry provider, expanding rapidly into mainstream international markets.
Each developer on the RME team is either a musician or sound engineer - besides being a specialist in hardware and software development. Additionally, to give their designs a persistent competitive edge in today's market, RME developers regularly network with other industry specialists to exchange knowledge and information - truly designing a line of products with superior quality, and affordable, mass-market appeal.
RME has had a consistent string of successful product releases, earning awards and accolades from the press and the public alike. The enthusiastic response and worldwide support the RME product line has generated ranks them one of the top audio device companies in the industry.
